Primary tabs
Fast In-situ Stratospheric Hygrometer (FISH)
Status
Armin Afchine and Nicole Spelten with the FISH instrument.
The Fast In situ Stratospheric Hygrometer (FISH), developed at the Forschungszentrum Jülich (Germany), is based on the Lyman-a photofragment fluorescence technique. Details of the instrument and the calibration procedure are described in Zöger et al. [1999]. FISH has been used in several campaigns both from balloon and aircraft and compared with a large number of other hygrometers [Kley et al., 2000].
FISH consists of a closed, vacuum-tight fluorescence cell, a Lyman-a radiation source, a PMT in photon-counting mode, detectors to monitor the VUV radiation output of the Lyman-a lamp, and a mirror drive that controls the measuring cycle (see diagram): determination of the fluorescence and background count rate and of the lamp intensity. With a measurement frequency of 1 Hz, the noise equivalent mixing ratio at 3 ppmv is 0.2-0.15 ppmv, and the detection limit is 0.18-0.13 ppmv.
FISH is calibrated between flights in the laboratory using a calibration bench under realistic conditions, that is varying the H2O mixing ratio of the test air from a few ppmv to several hundred ppmv and the pressure from 1000 to 10 hPa. A frost point hygrometer is used as a reference instrument. The overall accuracy of FISH measurements is 5-6 %.